How to Build a Concrete Seeder?

Home and Garden

Building a concrete seeder is a practical and efficient way to ensure accurate and uniform seed distribution for planting. In this article, we will guide you through the step-by-step process of constructing a concrete seeder. From gathering the necessary materials to assembling the seeder, we will cover all the important subtopics to help you successfully build your own concrete seeder.

Gathering the Materials

Before you start building your concrete seeder, it is essential to gather all the necessary materials. Here is a list of materials you will need:

  • Concrete mixer: To mix the concrete for the seeder.
  • Steel bars: For reinforcing the concrete structure.
  • Wood or metal planks: To create the mold for the seeder.
  • Seeding mechanism: The part responsible for distributing the seeds.
  • Screws and nails: To secure the mold and parts together.
  • Measuring tape and level: To ensure accurate dimensions and alignment.

Preparing the Mold

Creating a sturdy and precise mold is crucial for the successful construction of a concrete seeder. Follow these steps to prepare the mold:

  1. Measure and mark: Use the measuring tape to determine the desired dimensions of the seeder. Mark these measurements on the wood or metal planks.
  2. Cut the planks: Using a saw or appropriate cutting tool, cut the planks according to the marked measurements.
  3. Assemble the mold: Secure the planks together using screws or nails. Ensure the mold is tightly sealed to prevent concrete leakage.
  4. Reinforce the mold: Place steel bars inside the mold to reinforce the concrete structure.

Mixing and Pouring the Concrete

Once the mold is ready, it’s time to mix and pour the concrete. Follow these steps:

  1. Prepare the concrete mix: Follow the instructions provided with the concrete mixer to prepare the appropriate concrete mix.
  2. Pour the concrete: Slowly pour the mixed concrete into the mold, ensuring it fills all corners and spaces evenly.
  3. Smooth the surface: Use a trowel or similar tool to level the concrete surface and remove any excess.
  4. Cure the concrete: Allow the concrete to cure and harden for the recommended time, typically around 24-48 hours.

Installing the Seeding Mechanism

The seeding mechanism is a crucial component of a concrete seeder. Follow these steps to install it:

  1. Choose the seeding mechanism: There are various types of seeding mechanisms available, such as gravity-fed or mechanical. Select the one that suits your requirements.
  2. Create an opening: Using appropriate tools, create an opening in the concrete seeder mold where the seeding mechanism will be installed.
  3. Attach the seeding mechanism: Securely attach the chosen seeding mechanism to the opening in the seeder, following the manufacturer’s instructions.

Testing and Adjustments

Before putting your concrete seeder into full use, it is important to test and make any necessary adjustments. Follow these steps:

  1. Load the seeder: Fill the seeder with seeds, ensuring it is properly aligned with the seeding mechanism.
  2. Test the seed distribution: Activate the seeding mechanism and observe the seed distribution pattern. Make any adjustments if needed.

Maintenance and Care

To ensure the longevity and optimal performance of your concrete seeder, regular maintenance is required. Here are some maintenance tips:

  • Clean after use: Thoroughly clean the seeder after each use to prevent any seed residue from clogging the mechanism.
  • Inspect for damage: Regularly inspect the seeder for any signs of damage or wear. Replace or repair any damaged parts promptly.
  • Store in a dry place: When not in use, store the seeder in a dry and protected area to prevent rust or deterioration.


Building a concrete seeder can be a rewarding project that allows you to customize your seed planting process. By following the steps outlined in this article, you should now have a comprehensive understanding of how to construct a concrete seeder. Remember to gather all the necessary materials, prepare a sturdy mold, mix and pour the concrete, install the seeding mechanism, and perform thorough testing before putting it to regular use. With proper maintenance and care, your concrete seeder will serve you well in achieving accurate and uniform seed distribution.

Rate article
Add a comment